Table of Contents
Advertisement
2.1.3
ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based
utility.
Before you start using this utility, download the latest BIOS file from the ASUS website at
www.asus.com.
To update the BIOS using EZ Flash 2:
1.
Insert the floppy disk or the USB flash disk that contains the latest BIOS file to the
floppy disk drive or the USB port, then launch EZ Flash 2 in either of these two ways:
•.
Press <Alt> + <F2> during POST to display the following:
FLASH TYPE: MXIC MX25L8005 8Mb SPI
Current ROM
BOARD: P5N73-AM
VER: 0107
DATE: 05/29/2008
PATH: C:\M2NPVOC
A:
C:
Note
[Enter] Select
[Tab] Switch
•
Enter the BIOS setup program. Go to the Tools menu to select EZ Flash 2 and
press <Enter> to enable it.
Press <Tab> to switch between drives until the correct BIOS file is found.
2.
When the correct BIOS file is found, EZ Flash 2 performs the BIOS updating process
and automatically reboots the system when done.
• This function supports devices such as USB flash disks or floppy disks with FAT 32/16
format and single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
ASUS P5N73-AM
ASUSTek EZ Flash 2 BIOS ROM Utility B328
WIN98E
WIN98SE
NETTERM
DRIVERS
RECYCLED
WUTEMP
NEWFOL~1
[S] Save
[Up/Down/Home/End] Move
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
<DIR>
<DIR>
<DIR>
<DIR>
<DIR>
<DIR>
<DIR>
[ESC]Exit
2-3
Advertisement
Table of Contents
