Changing The Bulb; Changing The Water Filter; Calling Customer Service - Bosch KAN 58A50 Operating And Installation Instructions

Changing the bulb

Changing the bulb inside
the appliance
S Attention: Pull out the mains plug or
switch off the fuse!
S Loosen 2 screws under the cover
and remove the cover.
S Change the bulb.
replacement bulb max. 25 W,
220 240 V AC, E14 lampholder.
S Attach the cover.
Downloaded from Fridge-Manual.com Manuals
Changing the bulb on
the ice and water
dispenser
S Attention: Pull out the mains plug or
switch off the fuse!
S Prise out the cover with a screw
driver.
S Change the bulb.
replacement bulb max. 15 W,
220 240 V AC, E14 lampholder.
S Attach the cover.
Changing the water
filter
A new filter is available from customer
service under part no. 497818.
S Attention: Pull out the mains plug or
switch off the fuse!
S Cut off the water supply to the ap
pliance.
S Take the used filter out of the filter
holder and remove the connecting
lines.
Caution! Do not put the connecting
lines down! There may be some wa
ter left in the appliance and the lines.
S Connect new filter to the connecting
lines. Observe the direction of flow
printed on the filter!
S Insert the filter into the filter holder.
Calling customer
service
Your local customer service can be
found in the telephone directory or in
the customer service index. Please
provide customer service with the ap
pliance product number (E Nr.) and
production number (FD).
This information can be found on
the product label.
To prevent unnecessary call outs,
please assist customer service by
quoting the product and production
numbers. This will save you additional
costs.
en