Advertisement
~HONDA
~.
VF1000F
Rotate the crankshaft
90°
counterclockwise to align
the
T2.4
mark with the crankcase mating surfaces
and check the valve clearances for the No.4 cylin-
der.
Adjust using the procedures for the No.1 cylinder.
Rotate
the crankshaft 270
0
counterclockwise to
align the
Tl.3
mark with the crankcase mating
sur·
faces and check the valve clearances for the No.3
cylinder.
Adjust
using the
procedures
for the No.1 cylinder.
Rotate
the
crankshaft
90°
counterclockwise
to align
the
T2.4
mark with the crankcase mating surfaces
and check the valve clearances for the No.2
cy
lin-
der.
Adjust
using
the same procedures
as for
the
No.
1
cylinder.
Install
the
oil pipes with
their shorter
pipe
ends
toward the
exhaust sides.
Install the
9
mm
and
6 mm bolts
and
tighten the
9
mm bolts first, then the
6
mm bolts.
TORQUE:
9 mm - 43-47 N·m (4.3-4.7 kg-m.
31-34 ft·lb)
6 mm - 10-14 N'm (1 .0-1.4 kg·m.
7-10
ft·lb)
Install the
front
cylinder head cover with its
in-
sulator
grooves facing up and tighten the cover
bolts.
(1)
T2.4 MARK
,......--:
(2)
CRANKCASE MATING
SURFACE
MAINTENANCE
(1)6
mm BOLTS
(2) 9
mm BOLTS
(2)
FRONT
CYLINDER HEAD COVER
3-10
Advertisement
