Account Screen - ZyXEL Communications EMG2926-Q10A User Manual

Figure 104 Maintenance > General
The following table describes the labels in this screen.
Table 63 Maintenance > General
LABEL
System Name
Domain Name
Administrator
Inactivity Timer
Apply
Cancel

24.4 Account Screen

It is strongly recommended that you change your EMG2926-Q10A's password.
If you forget your EMG2926-Q10A's password (or IP address), you will need to reset the device.
See Section 24.8 on page 171
Click Maintenance > Account. The screen appears as shown.
Figure 105 Maintenance > Account
The following table describes the labels in this screen.
Table 64 Maintenance > Account
LABEL
User Account Entries
#
User Name
Chapter 24 Maintenance
DESCRIPTION
System Name is a unique name to identify the EMG2926-Q10A in an Ethernet network.
Enter the domain name you want to give to the EMG2926-Q10A.
Type how many minutes a management session can be left idle before the session times
out. The default is 5 minutes. After it times out you have to log in with your password again.
Very long idle timeouts may have security risks. A value of "0" means a management
session never times out, no matter how long it has been left idle (not recommended).
Click Apply to save your changes back to the EMG2926-Q10A.
Click Cancel to exit this screen without saving.
for details.
DESCRIPTION
This is the index number of a user account.
The EMG2926-Q10A's user account name.
EMG2926-Q10A User's Guide
165