Advertisement
1-2. PC Board Replacement
1-2-1. Tuner Unit PC Board
1. Remove the top cover. (Refer to item 1-1-1.)
2. Disconnect the flexible cable (1).
3. Remove the screw (2) and the screw (3).
4. Remove the claw, then remove the Tuner Unit PC Board (4).
1-2-2. Digital PC Board
1. Remove the top cover. (Refer to item 1-1-1.)
2. Peel off the tape (1).
3. Disconnect two flexible cables (2) and the connector (3).
4. Remove four screws (4), and the Digital PC board (5).
Note:
• After replacing, attach the tape (1) to its original position.
• The Digital PC Board (5) is connected to the Mother PC board (6) by a connector (7). Take notice when removing.
Connector (3)
Digital PC board (5)
Connector (7)
Tape(1)
Screws (4)
Mother PC board (6)
Screw (3)
Flexible
cable (1)
Claw
Fig. 2-1-7
Flexible
cables (2)
Claws
Connectors (7)
Fig. 2-1-8
Tuner Unit PC board (4)
Screw (2)
Flexible
cable (2)
A
A
Connector
Advertisement
