Bluetooth setup
.
Your cell phone may require a passcode. In this case the
handset screen displays Check cellular. ENTER PASS
CODE. Enter the cell phone passcode into the handset
SET
and press
.
Enter the PIN of the telephone base (the default PIN
is 0000) into your cell phone to continue the pairing
process. The handset displays Adding Cell Phone A to
device list...
9.
When a device is successfully connected, the handset
displays Cell Phone A is added and connected to base.
You hear a confirmation tone. The corresponding status icon ( 1 or
displays. The corresponding device light on the telephone base (DEVICE 1
or DEVICE 2) turns on.
If you have trouble pairing your cell phone, it may not be compatible
with your TL92271/TL92371/TL92471. Check the Bluetooth
compatibility list at
NOTES:
•
The pairing process may take up to one minute. If the pairing process fails, try again.
•
If you put the handset back in the telephone base or charger while pairing, the process
is cancelled and the handset returns to idle mode.
•
If a device fails to connect, the handset displays Headset A is added into the device
list, and then displays Please use headset to connect to base.
to save.
www.telephones.att.com
Adding
Cel l Phone A
to device
list...
1
Cel l Phone A
is added
and connected
to base.
.
2)