Front Cover - JUKI HZL-350Z series Service Manual

- Loosen screw (q) about 3mm. (9)
Note 1:
First using electric torch (flash light) etc to
locate screw (q) position which deeply inside
the machine.
Note 2:
To reach the screw (q), use Philips type
screwdriver through the operation hole on
plate. (10)
- Remove screw (r). (11)
- Remove front cover following direction of
arrow. (12)
Attention:
Be sure to remove the front cover carefully,
because the leader wire and the body are
connected together.
q
9
Operation hole
r

Front cover

7