Replacement - Danfoss SET 3E Installation Manual

4.0 Replacement

Please see overleaf for a table containing replacement wiring
information.
Some timecontrols are connected in diff erent ways depending upon
the type of system and/or the controls which are fi tted. Consult
the column headed "NOTE: The conversion applies only if...." to
determine whether the SET3E GRAVITY or PUMPED is the correct
GB
conversion.
If there is any doubt about the way in which the existing programmer
is connected, please contact our Technical Services Department
before proceeding with replacement.
Note: The SET3E is a direct plug-in replacement for a Danfoss
Randall SET5, although it does not off er 5/2 day programming
option.
Danfoss Heating
13