Page 1
Gregory Machinery Pty Ltd www.gregmach.com 07 3375100 Operating Instruction Operating Instructions and Parts Manual and Parts Manual Mast-R-Lift Models: 02101A and 02102A JessEm Tool Company, LTD 100 Caplan Ave., Unit 14 & 15 Barrie, ON L4N 9J2 Canada 705-726-8233 705-726-7519 Fax 1-866-272-7492 www.jessem.com...
Page 2
Read and understand the contents of this manual before assembly or operation of this product. Thank you for choosing this product from JessEm Tool Company. We appreciate your support and hope that our product serves you well. This product is designed to provide many years of reliable service provided it is used as intended and taken care of.
IMPORTANT SAFETY PRECAUTIONS Before operating any router, read and understand all safety instructions in the owner’s manual that came with the router. If you do not have a manual, contact the manufacturer and obtain one before using any power tool. ...
Page 4
Contact JessEm for a warranty claim return authorization and instructions to proceed. The consumer is responsible for shipping costs to return product to JessEm Tool Company. We will repair or replace the product at our discretion and JessEm Tool will return shipment to you at no charge.
Page 5
Installing the Router (cont’d) Rotate the router so that when the final installation is made all router controls will be positioned for convenient access. Then back the motor off approx. 1/16” from contacting the top plate and tighten the cap screw on the carriage assembly. Installing a JessEm Lift in a Figure 1 Custom Router Table Application...
Page 6
Figure 5 Figure 4 Figure 4 Leveling the Lift to the Table Top Leveling the Lift to the Table Top Tab-Loc Insert Rings Loc Insert Rings The Mast-R-Lift features 8 drilled and tapped Lift features 8 drilled and tapped The Rout-R-Lift FX comes with one insert Lift FX comes with one insert holes around the perimeter of the insert plate holes around the perimeter of the insert plate...
Page 7
Using the Mast-R-Lift To raise your router, turn the height adjustment handle clockwise. To lower, turn the handle counter-clockwise. Keep in mind that one complete revolution equals 1/16” of change. When your adjustment is complete, remove the handle and place somewhere off the work surface for safety.
Need help?
Do you have a question about the 02101A and is the answer not in the manual?
Questions and answers