Table of Contents
Advertisement
• Quicker Wash
This function can be used in Cottons and Synthetics programmes. It decreases the
washing times and also the number of rinsing steps for lightly soiled laundry.
C
When you select this function, load your product with half of the maximum laundry specified in the
programme table.
• Rinse Hold
If you are not going to unload your clothes immediately after the programme completes,
you can use rinse hold function to keep your laundry in the final rinsing water in order to
prevent them from getting wrinkled when there is no water in the product. Press Start/
Pause button after this process if you want to drain the water without spinning your
laundry. Programme will resume and complete after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start
/ Pause button. The programme resumes. Water is drained, laundry is spun and the
programme is completed.
• Night mode
Use to wash the cottons with lesser energy consumption. Spin steps are cancelled for
a silent washing and the cycle ends with the Rinse Hold step. After completion of the
programme, run Spin cycle to spin the laundry.
4.6.8 End Time
With the End Time function, the startup of the programme may be delayed up to 24 hours.
After pressing End Time button, the programme's estimated ending time is displayed. If
the End Time is adjusted, End Time indicator is illuminated.
1 Open the loading door, place the laundry and put detergent, etc.
2 Select the washing programme, temperature, spin speed and, if required, the auxiliary
functions.
3 Set the end time of your choice by pressing the End Time button. End Time indicator
illuminates.
4 Press Start / Pause button. Time countdown starts. ":" sign in the middle of the end time
on the display starts flashing.
31 / EN
Washing Machine / User's Manual
Advertisement
Table of Contents
