Table of Contents
Advertisement
Configure via Push
Button
Configure via Client
PIN Code
III-3-5-4. Access Control
Access Control is a security feature that can help to prevent unauthorized
users from connecting to your wireless router.
This function allows you to define a list of network devices permitted to
connect to the BR-6428nS V3/BR-6228nS V3. Devices are each identified by
their unique MAC address. If a device which is not on the list of permitted
MAC addresses attempts to connect to the BR-6428nS V3/BR-6228nS V3, it
will be denied.
To enable this function, check the box labeled "Enable Wireless Access
Control".
MAC address
Click "Start PBC" (Push-Button Configuration)
to activate WPS on the access point. WPS will
be active for 2 minutes.
Enter the wireless client's PIN code here and
click "Start PIN" to activate PIN code WPS.
Refer to your wireless client's documentation if
you are unsure of its PIN code.
Select a PC name from the drop-down list and
click ">>" to add enter it into the blank field to
the right.
Click "Refresh' in the drop-down menu to
refresh the list of available MAC addresses. If
the address you wish to add is not listed, enter
72
Advertisement
Table of Contents
