Casio IT-10 Series Hardware Manual page 10

Table 1.4 Names of parts
No. Part Name
1 Strap hole
2 Headphone jack
3 Reset switch
4 Action button
5 UP/DOWN button
6 Battery pack cover lock
switch
7 Battery pack cover
8 IrDA port
9 Eject button
10 SD card slot
11 CF card slot
12 Indicator lamp (left)
13 Indicator lamp (right)
14 Power switch
15 LCD screen
16 Microphone
17 Program buttons
18 5way cursor button
19 Speaker
20 Serial connector
21 Power terminals
22 Power adaptor port
A commercially available strap can be attached here.
A commercially available earphones or headphones (with 3.5 mm in
diameter) can be attached here. Remove the rubber cover to use it.
This switch resets the terminal, similar to turning off and on the power
switch. Reset the terminal when some abnormality occurs, such as if the
buttons or tap operations stop working.
This button operates as the Enter key on a computer. Also, it has several
functions when the 5way cursor button is pressed at the same time.
This button moves the cursor and similar items up and down on the screen.
Be sure to keep the lock switches locked. Locking the switches prevents the
battery pack from falling out.
This is the cover for the battery pack.
This communication port is used data exchange via the IrDA interface.
This button ejects a CF card (CompactFlash card) installed in the slot.
Either SD card or multimedia card can be inserted in this slot.
CF card (CompactFlash card) can be inserted in this slot.
When the AC adaptor is connected to the terminal or the terminal is mounted
on the Basic Cradle, the lamp turns on in orange indicating the battery pack
is being charged, or in green indicating the battery pack is fully charged.
The lamp blinks in green when CF card or SD card is being accessed. It also
blinks in red for the alarm.
Press this switch to turn on the power or off. Once the power is turned on,
wait for 10 seconds or more to turn off the power.
The LCD screen displays information and stylus is used to enter information
or operate on the screen.
Direct voice sound here when recording on the Pocket Word or Memo
screen.
Pushing one of the program buttons starts the program assigned to that
button. The four default settings are, from the upper left, Menu, Calendar,
Contents, and Inbox.
This button moves the cursor and similar items up, down, left and right on
the screen. Pressing the center of the button straight down performs the same
operation as the Enter key.
Sounds such as the alarm come out of the speaker. Sound does not come out
when a set of earphones or headphones is connected to the headphone jack.
Peripheral device with RS-232C/USB interface can be connected to the
connector. Remove the rubber cover and store it at the right side silo before
use.
Terminals for supplying power from the Cradle.
The dedicated AC adaptor (AD-S15050AE) can be connected to this port.
10
Description