Clean Filter - Friedrich MWM18Y3J Installation And Operation Manual

Clean and maintenance

Clean filter

Open panel
1
Open panel to access filter.
Remove filter
2
Remove the filter as
indicated in the fig.
Note:
■ The filter should be cleaned every three months. If environment is
excessively dusty more frequent cleaning may be required.
■ After removing the filte , do not touch fins to avoid injur .
■ Air dry the filter to avoid deformation or fire hazard.
Clean filter
3
● Use vacuum or water to
clean the filter.
● When the filter is very dirty, use
warm water (below 113°F) to
clean it, and then allow to dry.
Install filter
4
Install the filter and then close the
panel cover tightly.
10