Asus V-Series P5P43 Installation Manual page 73

9.. Chassis.intrusion.connector.(4-1.pin.CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch.
Connect one end of the chassis intrusion sensor or switch cable to this
connector. The chassis intrusion sensor or switch sends a high-level signal to
this connector when a chassis component is removed or replaced. The signal
is then generated as a chassis intrusion event.
By default, the pin labeled "Chassis Signal" and "Ground" are shorted with
a jumper cap. Remove the jumper caps only when you intend to use the
chassis intrusion detection feature.
P5QL-M DELUXE/WIFI-AP
P5QL-M DELUXE/WIFI-AP Chassis intrusion connector
10.. Front.panel.audio.connector.(10-1.pin.AAFP)
This connector is for a chassis-mounted front panel audio I/O module that
supports either HD Audio or legacy AC`97 audio standard. Connect one end
of the front panel audio I/O module cable to this connector.
P5QL-M DELUXE/WIFI-AP
P5QL-M DELUXE/WIFI-AP Analog front panel connector
• We recommend that you connect a high-definition front panel audio module
to this connector to avail of the motherboard's high-definition audio capability.
• If you want to connect a high-definition front panel audio module to this
connector, set the Front.Panel.Type item in the BIOS setup to [HD.Audio];.
if you want to connect an AC'97 front panel audio module to this connector,
set the item to [AC'97]. By default, this connector is set to [HD.Audio]..See
section 5.4.5 Onboard Devices Configuration for details.
ASUS V-Series P5P43
CHASSIS
AAFP
PIN 1
HD-audio-compliant
pin definition
PIN 1
Legacy AC'97
compliant definition
4-9