Boot Settings Configuration - Asus V-Series P5P43 Installation Manual

5.6.2 Boot Settings Configuration

Boot Settings Configuration

Quick Boot
Full Screen Logo
AddOn ROM Display Mode
Bootup Num-Lock
Wait For 'F1' If Error
Hit 'DEL' Message Display [Enabled]
Quick.Boot.[Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST) while
booting to decrease the time needed to boot the system. When set to [Disabled],
BIOS performs all the POST items. Configuration options: [Disabled] [Enabled]
Full.Screen.Logo.[Enabled]
This allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Set this item to [Enabled] to use the ASUS MyLogo2™ feature.
AddOn.ROM.Display.Mode.[Force.BIOS]
Allows you to set display mode for Option ROM.
Configuration options: [Force BIOS] [Keep Current]
Bootup.Num-Lock.[On]
Allows you to select the power-on state for the NumLock. Configuration options:
[Off] [On]
Wait.for.'F1'.If.Error.[Enabled]
When set to Enabled, the system waits for the.F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
Hit.'DEL'.Message.Display.[Enabled]
When set to Enabled, the system displays the message "Press.DEL.to.run.Setup"
during POST. Configuration options: [Disabled] [Enabled]
ASUS V-Series P5P43
[Enabled]
[Enabled]
[Force BIOS]
[On]
[Enabled]
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
5-31