HP 9020 CE Handbook page 23

9020 EnvironmentaVlnstalJation/PM
2-13
512K RAM Board Installation Information
Instructions For HP-Qualified Personnel:
Follow the instructions that apply to the installation you are performing. For example, if you are
installing the RAM card in a 520 computer you would perform the steps that begin with: (ALL), and
(520).
Load Board
Systems that are shipped from the Fort Collins Systems Division with 1 CPU, 1 lOP, and one 512K
Byte RAM Board, will also have a Load Board in the slot that is adjacent to the RAM board (top
occupied slot). If any other Finstrates, or RAM, is added to this configuration, the Load Board must
be removed from the computer.
Any time the Processor Stack configuration is reduced to 1 CPU, 1 lOP, and one 512K Byte RAM
Board, A Load Board (09855-66525) is required. Load Board (09855-66525) is a replaceable
part.
CE Handbook
When completed with the installation, insert this page and the following page in your CE Handbook
(after page 2-12 of either the 9020 or 9030/9040 section).
Part
Numbers
512K Byte RAM (exchange)
(new)
Load Board
97047-69805
5061-6805
09855-66525