Frs Mode; Selecting A Channel; Listening For A Call - Kenwood FreeTalk UBZ-GR14 Instruction Manual

1 S
ELECTING A
1 Press the MODE key momentarily.
• The FRS and CH icons blink.
2 Press the
channel number.
• Press and hold the
decrease the channel number until you release the key.
3 Once you have selected your desired channel number
(1 ~ 14), press the PTT switch to complete the selection
and return to normal operation.
2 L
ISTENING FOR A
1 If a calling party first presses their M key to alert you that
they are going to speak, you will hear a 2 second ringing
tone.
2 You will hear audio from the speaker. Readjust the
volume if necessary.
• The reception indicator appears while you are receiving.
3 When the party has finished speaking, you can respond
to the call (refer to "3 M
This transceiver has a feature that allows you to ignore
unwanted calls. To ignore unwanted calls, you can set up a
code on your selected channel. However, you must ensure
that each member of your group is using the same code,
otherwise you will be unable to communicate with each
other. If you set the code on your selected channel to "OF"
(off), you will hear calls from everyone within range who is
using the same channel you have selected.
UBZ-GR14 E 1-20

FRS MODE

C
HANNEL
or key to increase or decrease the
or key to continuously increase or
C
ALL
C " on page 8).
AKING A ALL
7
7
01.4.12, 9:35 AM