Installing / Removing The Belt Hook; Installing / Removing The Stereo Headphones - Kenwood FreeTalk UBZ-GR14 Instruction Manual

I
NSTALLING
1 Align the belt hook tabs with the guides on the rear of the
transceiver.
2 Slide the belt hook down the guides until it locks in place.
3 To remove the belt hook, pull back on the lever on the top
of the belt hook and slide the belt hook out of the guides.
I
NSTALLING
Note: Always switch OFF the transceiver power when installing or
removing the headphones.
1 Open the SP tab on the
top of the transceiver.
2 Insert the headphone
plug into the SP jack.
3 When you remove the
head-phones from the
transceiver, be sure to
cover the SP jack with
the attached tab in
order to keep dust and
dirt away from the contacts.
4
UBZ-GR14 E 1-20
/ R B
EMOVING THE ELT
/ R S
EMOVING THE TEREO
4
H
OOK
H
EADPHONES
01.4.12, 9:35 AM