Hitachi DH 24PD3 Technical Data And Service Manual page 11

G. Driling hole (rotation only)
Drill chuck (13VLD-D)
Chuck wrench
(NOTE)
The 13VLA drill chuck and chuck adapter (D) cannot be used for reverse rotaion. If reverse rotation is to
be used for loosening screws, use the plus bit (Bit No. 2), described below, by attaching it directly to
chuck adapter (D).
Chuck adapter (D) (for SDS-plus shank type)
13 mm (1/2") Drill chuck 13VLD-D (with chuck wrench)
H. Driving screws (rotation only)
Plus driver bit [overall length: 25 mm] (for cross-recessed head screw)
Bit No.
Bit No.
No. 2
No. 3
I. Grease for electric impact drill
Containing 500 g (1.1 lbs.): Code No. 980927
Containing 30 g (0.07 lbs.): Code No. 981840
70 g (0.15 lbs.): Code No. 308471
J. Dust cup, dust collector (B)
Dust cup
Code No. 971787
For drilling holes in steel and wood
• • •
+
Part name
+
Chuck adapter (D)
(SDS-plus shank)
Screw size
Code No.
3 --- 5 mm
971511Z
6 --- 8 mm
971512Z
Dust collector (B) ass'y
Code No. 306885
Chuck adapter (D)
(SDS-plus shank)
Code No.
303624
321813
--- 8 ---
K. Paper dust bag
Code No. 302741