Pair Function
You can register a maximum of five pair partners you
contact often to easily call or send mail.
Registering a Pair Partner
When the standby screen is displayed, press N.
Use s to select a blank screen and then
press c (Select).
Use j to select YES and then press c (OK).
Use a to select a pair partner, press c (Detail)
and then c (Select).
•
When registering an address book entry with multiple
phone numbers and e-mail addresses as pair partner,
select the phone number and e-mail address to use
with the Pair function.
•
When you delete an address book entry registered in
the pair partner, the address book entry is also deleted
from the Pair function.
26
Making a Call to a Pair Partner
When the standby screen is displayed, press N.
Use s to select the person you want to call.
Use j to select Call and then press c (Select).
Sending Mail to a Pair Partner
When the standby screen is displayed, press N.
Use s to select the person you want to send
mail.
Use j to select E-mail or C-mail and then
press c (Select).
•
To create an e-mail message, see "Creating and
Sending E-mail Messages" on page 27. To create a
C-mail message, see "Creating and Sending C-mail
Messages" on page 30.