Canon EOS 5D Mark II Instruction Manual page 175

C.Fn I -5
The AEB shooting sequence and white balance bracketing sequence can
be changed.
0: 0, -, +
1: -, 0, +
AEB
0 : Standard exposure
- : Decreased exposure - : Blue bias
+ : Increased exposure + : Amber bias
C.Fn I -6
0: Disable
1: Enable (Tv/Av)
This works in the shutter-priority AE (s) and aperture-priority AE (f)
modes. When the subject's brightness changes erratically and the
correct autoexposure cannot be obtained, the camera will change the
exposure setting automatically to obtain a correct exposure.
C.Fn I -7
0: Auto
1: 1/200-1/60 sec. auto
When flash is used with aperture-priority AE (f), this prevents a slow
flash-sync speed from being used in low-light conditions. Effective for
preventing subject blur and camera shake. The only problem is that,
while the subject will be properly exposed with the flash, the background
will come out dark.
2: 1/200 sec. (fixed)
The flash-sync speed is fixed to 1/200 sec. This better prevents subject
blur and camera shake than with setting 1. However, the background will
come out darker than with setting 1.
Downloaded From camera-usermanual.com Canon Manuals
Bracketing sequence
B/A Direction
0 : Standard white balance 0 : Standard white balance
Safety shift
Flash sync. speed in Av mode
3 Custom Function SettingsN
WB Bracketing
M/G Direction
- : Magenta bias
+ : Green bias
175