Honda 2006 Accord Hybrid Reference Owner's Manual page 74

Main Menu
Table of Contents
Daytime Running Lights
With the headlight switch off, the
high beam headlights and the high
beam indicator come on with
reduced brightness when you turn
the ignition switch to the ON (II)
position and release the parking
brake. They remain on until you turn
the ignition switch off, even if you
set the parking brake.
The headlights revert to normal
operation when you turn them on
with the switch.
Daytime Running Lights, Instrument Panel Brightness
Instrument Panel Brightness
SELECT/RESET KNOB
The Select/Reset knob on the
instrument panel controls the
brightness of the instrument panel
lights. Turn the knob to adjust the
brightness.
The instrument panel will illuminate
with reduced brightness when you
open the driver's door. The
brightness will increase slightly
when you insert the key in the
ignition switch, then go to normal
brightness when you turn the
ignition switch to the ON (II)
position.
If you do not insert the key in the
ignition switch after opening the
driver's door, the illumination turns
off about 30 seconds after you close
the door.
If you insert the key but do not turn
the ignition switch to the ON (II)
position, the illumination turns off in
about 10 seconds.
To reduce glare at night, the instru-
ment panel illumination dims when
you turn the light switch to
. Turning the Select/Reset
knob fully to the right until you hear
a click will cancel the reduced bright-
ness.
or
73