Table of Contents
Advertisement
Main Menu
Table of Contents
Lights
Replacing Rear Turn Signal Light
Bulbs
HOLDING CLIPS
Open the trunk.
1.
2.
Remove the holding clips from the
lining by using a flat-tipped
screwdriver.
210
BULB
SOCKET
Remove the socket by turning it
3.
one-quarter turn counterclockwise,
and pull the bulb straight out of its
socket.
4.
Push a new bulb straight into the
socket until it bottoms, and
reinstall the socket into the light
assembly by turning it clockwise
until it locks.
5.
Test the new bulb to make sure it
works.
6.
Set the lining back.
Advertisement
Chapters
Table of Contents
