Table of Contents
Advertisement
Main Menu
Table of Contents
Park (P)
This position
mechanically locks the transmission.
Use Park whenever you are turning
off or starting the engine. To shift
out of Park, you must press on the
brake pedal and have your foot off
the accelerator pedal. Press the
release button on the bottom of the
shift lever to move it.
If you have done all of the above and
still cannot move the lever out of
Park, see
Shift Lock Release
page
169
.
You must also press the release
button to shift into Park. To avoid
transmission damage, come to a
complete stop before shifting into
Park. The shift lever must be in Park
before you can remove the key from
the ignition switch.
Reverse (R)
pedal and press the release button to
shift from Park to Reverse. To shift
from Reverse to Neutral, come to a
complete stop and then shift.
Neutral (N)
need to restart a stalled engine, or if
it is necessary to stop briefly with
the engine idling. Shift to the Park
position if you need to leave your
vehicle and apply the parking brake.
on
Press on the brake pedal when you
are moving the shift lever from
Neutral to another gear.
Drive (D)
Use this position for
your normal driving. The
transmission automatically selects a
suitable gear for the vehicle speed
and acceleration. You may notice the
transmission shifting up at higher
speeds when the engine is cold. This
helps the engine warm up faster.
Press the brake
Drive (D )
to D, except only the first three
gears are selected instead of all five.
Use D when towing a trailer in hilly
terrain, or to provide engine braking
when going down a steep hill. D can
Use Neutral if you
also keep the transmission from
cycling between third and fourth
gears in stop-and-go driving.
Automatic Transmission
This position is similar
3
3
CONTINUED
3
167
Advertisement
Chapters
Table of Contents
