Honda 2006 Accord Hybrid Reference Owner's Manual page 122

Main Menu
Table of Contents
Loading CDs in the In-dash CD
Changer
Press and hold the LOAD button
1.
until you hear a beep and see
''LOAD'' in the display, then
release the button.
2. The disc number for an empty
position is highlighted and the red
light starts blinking.
Insert the disc into the CD slot
3.
when the green CD load indicator
comes on. Insert it only about
halfway; the drive will pull it in the
rest of the way. You will see
''BUSY'' in the display as the CD
load indicator turns red and blinks
as the CD is loaded.
4. When the CD load indicator turns
green and ''LOAD'' appears in the
screen again, insert the next CD in
the slot.
5. Repeat steps 1 through 3 until all
six positions are loaded. If you are
not loading all six positions, the
system begins playing the last CD
loaded.
You can also load a CD into an empty
position while a CD is playing. Select
the empty position (the disc number
indicator is not highlighted) and
press the appropriate preset bar or
touch a disc icon. The current CD
stops playing and starts the loading
sequence. The CD just loaded will
play.
Playing a CD, CD Changer
To select a different disc, press the
appropriate side of a preset bar
(1 6) or use the Preset 5 (DISC
to select the previous disc or Preset
6 (DISC ) to select the next disc in
sequence. On vehicles with
navigation system, touch the
appropriate disc icon or press the
or side of the CH/DISC bar. If
you select an empty position in the
CD changer, the system will try to
load the CD in the next available slot.
)
121