Central Pneumatic 68140 Set Up And Operating Instructions Manual page 12

is responsible for providing a suitable foundation & rubber
foot mounting where necessary.
HIGH ALTITUDE APPLICATIONS
Refer to the engine manufacturer's recommendations for
operation of engines at high altitudes.
ASSEMBLING THE RUBBER FOOT
See Figure 2.
Mount the rubber foot as shown in figure.
Tighten firmly with an open-end wrench (not included)
to secure it in position.
ASSEMBLY
DANGER!
Under no circumstances should a compressor be
used in an area where toxic, volatile, or corrosive
agents are used or stored near the compressor.
CAUTION!
Unusual noise or vibration indicates a problem. Do
not operate the compressor until the source has been
identified and corrected by a qualified technician.
NUT
WASHER
RUBBER FOOT
SCREW
12
Fig. 2