Muting The Sound Temporarily; Listening Through Headphones; Changing The Tone - Kenwood XD-251 Instruction Manual

Muting the sound temporarily

MUTE
÷ Press again to resume the original volume.
÷ The sound muting is also canceled when the volume is controlled.

Listening through headphones

Insert the headphone plug into the PHONES jack.
PHONES
÷ The sounds from all speakers are cut off.

Changing the Tone

Extra Bass
The factory setting is ON.
EX.BASS
÷ Switching between ON and OFF
each time the key is pressed.
Selecting the Desired Tone
Operation on the unit
EX.BASS
÷ The sound of the pressed
key is selected.
÷ Press FLAT to cancel the
selection.
O TIMER
PRESET EQ
M FLAT ROCK
C AUTO PAL
A frame is shown for the
selected sound.
(Remote control unit only)
MORY PROGRAM STEREO TIMER SLEEP
ESET REPEAT 1 AUTO PRESET EQ
AUSE ALL DISC RANDOM FLAT ROCK POP
MEMORY STOP P.B.C AUTO PAL NTSC
Blinks
Lit
REO TIMER SLEEP EX.BASS
O PRESET EQ
DOM
FLAT ROCK POP JAZZ
B.C AUTO PAL NTSC L R
Remote control operation
EQ
The sound is switched as
shown below each time
the key is pressed.
1 ROCK
2 POP
3 JAZZ
4 FLAT (cancelled)
Simultaneous use with
SLEEP EX.BASS
EX.BASS is possible.
POP JAZZ
NTSC L R
STANDBY mode of ON/STANDBY (
EX.BASS
JAZZ
L R
When the power cable plug of this unit is inserted into a
kHz
MHz receptacle, a minute current flows for memory
protection.This status is referred to as the STANDBY mode,
and the unit in the STANDBY mode can be turned ON from
the remote control unit.
For better visibility of the time display during
power OFF
[Remote control]
When the SLEEP/CLOCK LIGHT key is pressed while the power is
OFF, the backlight lights for about 10 seconds.
Display Switching
When the power is ON, the display indication can be
switched.
During CD Playback
Each time the DISPLAY/DEMO key (the DISPLAY key in case of
remote control) is pressed, the indication changes as shown below.
1 Number of the disc being played/title No./elapsed
time
2 Number of the disc being played/title No./remaining
time of the title
3 Number of the disc being played/title No./*remaining
time of the disc
4 Present time (return to 1 after several seconds)
*During REPEAT playback and RANDOM playback, the
remaining disc time is not displayed.
Other than During CD Playback
Each time the DISPLAY/DEMO key (the DISPLAY key in case of
remote control) is pressed, the indication changes as shown
below.
1 Normal display (TAPE/AUX/TUNER indication etc.)
2 Present time (return to 1 after several seconds)
SLEEP/
CLOCK LIGHT
DISPLAY
/DEMO
15
XD SERIES (En)
) switch