Winding The Bobbin - JUKI HZL - 353Z Series Instruction Manual

Winding the bobbin

- Place the thread and spool
cap onto the spool pin.
For small thread spools, place
small side of spool cap next
to spool. (1)
- Snap thread into thread guide.
(2)
- Wind thread clockwise around
bobbin winder tension discs.
(3)
- Thread bobbin as illustrated
and place on spindle. (4)
- Push bobbin spindle to right.
(5)
- Hold thread end. (6)
- Step on foot control pedal. (7)
- Cut thread. (8)
- Push bobbin spindle to left (9)
and remove.
Please Note:
When the bobbin winder
spindle is in "bobbin winding"
position, the machine will not
sew and the hand wheel will not
turn. To start sewing, push the
bobbin winder spindle to the left
(sewing position).