Recording - Kenwood CD Player DP-SE7 Instruction Manual

28

Recording

Recording
0
Top side
Reverse
side
Check the tape transport direction
indicator.
2
rev. mode
Dolby NR
3 3
1. Load a tape in deck.
1 1
1 Open the tray of the cassette deck.
2 Insert a tape.
3 Close the tray.
2. Select the tape transport direction.
To reverse the transport direction
1 Press the playback key for the direction to be played (lights green).
2 Stop playback (lights red).
3
3. Set the recording condition.
1 Select the reverse mode.
3 3
2 Select the DOLBY NR mode.
Note that this cassette deck cannot record onto Metal
Note Note
tapes.
1 1
3 3
3 3
÷ Differentiation between normal (TYPE I) and high
(TYPE II) tape is set automatically.
÷ Remove tape slack before loading.
÷ When recording is started, the tape is transported in the
direction selected in this step.
÷ Wind the tape to the position where recording is to be
started.
Recording
R-SE7/DP-SE7/X-SE7 (En)
4 4
2 2
5 5
£
£