Timer Programming - Kenwood CD Player DP-SE7 Instruction Manual

46
Adjust the clock before setting the timer.

Timer programming

This is a 24 hour timer.
Select the time and duration for the operation and the contents, and select operation or no operation
as required.
Adjust the clock before setting the timer.
1
Make preparations for the play (recording).
÷ To listen to radio
The station should
be preset prior to
¶
the above.
2
Adjust the listening volume.
3
Set the on/standby switch to standby
position.
4
Select a program No.
1
During display of program content
2
÷ To listen to CD ÷ To listen to tape
Insert a disc. Set a tape into deck.
(Program playback
is not possible.)
A
volume pure
control
on/standby
band
enter
÷ Listening to MD
Set a disc into the
MD recorder.
For recording and playback with an MD
recorder (DM-SE7), also refer to the instruc-
tion manual enclosed with the DM-SE7.
÷ For recording of broadcasts, muting becomes ON auto-
matically when the power is switched on by the timer.
÷ The "PROG." indicator lights.
÷ When a timer reservation already has been made, the
contents will change to the new settings.
1 ) ) ) :
Timer operation
R-SE7/DP-SE7/X-SE7 (En)
÷ For recording
Make prepa-
rations for re-
cording.•
(Steps 1 to 4)
R-SE7
PROG.