48
Adjust the clock before setting the timer.
8
Set the program.
This completes the program timer reservation. Please refer to the following item for confirmation,
changes, etc.
Ensure that the power is OFF.
Check the reservation content.
When timer operation is not required
Extinguish the program indication.
To set the same timer program again
Light the program indication.
tuning
band
tuning
tuning
÷ The "PROG." indicator lights.
1 ) ) : 5
÷ The timer does not operate when no program is set.
The reservation contents cannot be cleared. The
contents are cleared only when they are changed.
Note
Note
÷ The reserved contents will be displayed for 3 seconds
per item. After this, the previous display content appears
again.
To change the reserved contents
Restart the procedure of "Timer programming"
from the beginning.
1 ) ) : 5
÷ The reservation contents are held in memory.
1 ) ) : 5
÷ Also prepare the disc or tape and adjust the listening
volume.
Timer operation
R-SE7/DP-SE7/X-SE7 (En)
R-SE7
PROG.
Goes off
R-SE7
R-SE7
PROG.
Lights