Convenient Functions - Kenwood VRS-6100 Instruction Manual

Convenient functions

You can make further adjustments to the sound while listening to
playback in the surround mode.
SOUND
Adjusting the SOUND
1 Press the RECEIVER key on the remote control unit to set
it to the receiver control mode.
2 Press the SOUND key until the desired item appears in
the display.
Each time you press the button, the menu changes as follows:
Note that some items are not displayed depending on speaker
settings and listening mode.
1 "C": *1
Center speaker level adjustment
2 "RS":*1
Right surround speaker level adjustment
3 "RB": *1
Surround back right speaker level adjustment
4 "LB": *1
Surround back left speaker level adjustment
5 "LS": *1
Left surround speaker level adjustment
6 "SW": *1
Subwoofer level adjustment
7 "INPUT": (Analog mode only)
Input level adjustment
8 "NIGHT": *2
Midnight mode adjustment
9 "PANORAMA": *3
Panorama mode ON/OFF
0 "DIMENSION": *3
Dimension adjustment
- "CENTER WIDTH": *3
Center width adjustment
*1 The setting in the SOUND mode is temporary. It returns
automatically to the original level set in "Speaker settings"
when the receiver is turned OFF/ON.
*2 DOLBY DIGITAL, DTS mode only
*3 Only when the input signal is a 2-channel signal in the DOLBY
PRO LOGIC IIx MUSIC or DOLBY PRO LOGIC II MUSIC mode.
3 Use the MULTI CONTROL button (or the MULTI CONTROL
%/fi keys) to adjust the setting as desired.
÷ The adjustment item is displayed for approximately 20 seconds.
4 Press the SOUND key to advance to the next setting item.
32 EN
INPUT SELECTOR
MULTI
CONTROL @ / #
MULTI CONTROL
% / fi
¡
‹
‹
Panorama mode
(Only when the input signal is a 2-channel signal in the DOLBY PRO
LOGIC II x MUSIC or DOLBY PRO LOGIC II MUSIC mode)
When listening to music, you will be able to enjoy the "wraparound"
sound effect when you adjust the panorama mode.
1 Press the RECEIVER key on the remote control unit to set
it to the receiver control mode.
2 Press the SOUND key repeatedly until the "PANORAMA"
indication appears.
3 Use the MULTI CONTROL button (or the MULTI CONTROL
% / fi keys) to select PANORAMA mode "ON" or "OFF".
O N
Dimension mode
(Only when the input signal is a 2-channel signal in the DOLBY PRO
LOGIC II x MUSIC or DOLBY PRO LOGIC II MUSIC mode)
When listening to music with certain recordings, you will also be able to
achieve a suitable balance from all the speakers by adjusting the
dimension mode.
1 Press the RECEIVER key on the remote control unit to set
it to the receiver control mode.
2 Press the SOUND key repeatedly until the "DIMENSION"
indication appears.
3 Use the MULTI CONTROL button (or the MULTI CONTROL
%/fi keys) to adjust the soundfield towards the rear or
the front.
Soundfield is adjusted towards the front.
R
Standard setting.
R
Soundfield is adjusted towards the rear.
R
F
↓
F
↓
F