Listening To Radio Broadcasts; Tuning Radio Stations; Presetting Radio Stations Manually - Kenwood VR-716 Instruction Manual

Listening to radio broadcasts

The receiver can store up to 40 stations in the memory and recall them
by one-touch operation.

Tuning radio stations

BAND AUTO
Multi % / fi
Tune 1 / + ¡
Auto
1
Use the INPUT SELECTOR knob or TUNER key to select the
tuner.
2
Use the BAND key to select the desired broadcast band.
Each press switches the band
as follows:
1 FM
2 AM
3
Use the AUTO key to select the desired tuning method.
Each press switches the tuning method as follows:
1 AUTO lit (auto tuning)
2 AUTO not lit (manual tuning)
• Normally, set to "AUTO" (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
4
Use the MULTI CONTROL knob or Multi % / fi , or Tune – 1 / +
¡ keys to select the station.
Frequency
display
Auto tuning : The next station is tuned automatically.
Manual tuning : Turn the knob (press the key) to select the
desired station.
MULTI CONTROL
INPUT SELECTOR
TUNER
+ +
¢
Band
4
+
"AM" or "FM" indicator
appears in the display
"AUTO" indicator lights
up in the display.
"ST." lights when
a broadcast is being
received in stereo.
"TUNED" is displayed
when a station is received.

Presetting radio stations manually

MEMORY
1
Tune to the station you want to store.
2
Press the MEMORY key while receiving the station.
Blinks for 5 seconds
Proceed to step 3 within 5 seconds.
(If more than 5 seconds elapse, press the MEMORY key again).
3
Use the MULTI CONTROL knob or Multi % / fi keys to select
one of the station presets (1 – 40).
4
Press the MEMORY key again to confirm the setting.
• Repeat steps 1, 2, 3, and 4 to store as many stations as
necessary.
• If you store a station at a previously used preset, the previous station
will be replaced by the new one.
MULTI CONTROL
Lights for 5 seconds
21
EN