Miele KM 3010 Operating And Installation Instructions page 12

Warning and Safety instructions
~
Never open the outer casing of the appliance. Tampering with
electrical connections or components and mechanical parts is
highly dangerous to the user and can cause operational faults.
~
Installation, maintenance and repairs may only be carried out by
a suitably qualified and competent person in strict accordance with
current national and local safety regulations.
Repairs and other work by unqualified persons could be dangerous.
Miele cannot be held liable for unauthorised work.
~
During installation, maintenance and repair work, the appliance
must be disconnected from the gas supply and mains electricity
supply. It is only completely isolated from the electricity supply
when:
– the mains fuse is disconnected, or
– the screw-out fuse is removed (in countries where this is
applicable), or
– it is switched off at the isolator, or it is switched off at the wall
socket and the plug is withdrawn from the socket.
~
While the appliance is under guarantee, repairs should only be
undertaken by a service technician authorised by Miele. Otherwise
the guarantee is invalidated.
~
Faulty components must only be replaced by genuine Miele
original spare parts. The manufacturer can only guarantee the safety
of the appliance when Miele replacement parts are used.
~
The hob is not intended for use with an external timer switch or a
remote control system.
~
If the connection cable is damaged, it must be replaced by a
suitably qualified electrician with a special connection cable of type
H 05 V V-F (pvc insulated), available from the Miele Spare Parts
Department.
12