Store And Send; Autodial - Kenwood TK-3173 Instruction Manual

S S
TORE AND END
Store and send allows you to make DTMF calls without the
need for a DTMF keypad.
1 Press the key programmed as Autodial.
• "
2 Rotate the selector to select a digit.
• Alternatively, you can enter the digits by using the DTMF
keypad (keypad models only).
3 Press the C> key to accept the entered digit and move to
the next digit.
• Press the A key to delete an incorrect character. Press and
hold the A key to delete all entered characters.
4 Repeat steps 2 and 3 to enter the entire number.
• You can enter up to 16 digits.
5 Press the PTT switch to make the call or the Side 2 key to
page the selected recipient.
A
UTODIAL
Autodial allows you to store 16 names (up to 8 characters per
name) and DTMF numbers (up to 16 digits per number).
These operations can be performed with or without a DTMF
keypad.
■
S DTMF N
TORING
1 Press the key programmed as Autodial Programming.
• If programmed by your dealer, you can also press and
hold the # key for 1 second.
• The first entry in the Autodial list appears on the display.
2 Press the <B and C> keys, rotate the selector, or enter
an appropriate number using the DTMF keypad
(01 ~ 16) to select your desired Autodial list number.
• Press and hold the Side 1 key to toggle the display
between the list number and the entry name.
32
" appears on the display.
UMBERS