Redial (Keypad Models Only ) - Kenwood TK-3173 Instruction Manual

2 Press the <B and C> keys, rotate the selector, or enter
an appropriate number using the DTMF keypad
(01 ~ 16) to select your desired Autodial list number.
• The stored entry appears on the display. Press and hold
the Side 1 key to toggle the display between the list
number and the entry name.
3 Press the PTT switch to make the call or the Side 2
key to page the selected recipient.
■
C S
LEARING
1 Press the key programmed as Autodial Programming.
• If programmed by your dealer, you can also press and
hold the # key for 1 second.
2 Press the <B and C> keys, rotate the selector, or enter
an appropriate number using the DTMF keypad
(01 ~ 16) to select your desired Autodial list number.
3 Press the A or # key.
• "
entered number.
4 Press the S or
Autodial list.
R (K
EDIAL EYPAD
You can redial the last number you transmitted.
1 Press the # key or the key programmed as Autodial.
• The first entry in the Autodial list appears on the display.
2 Press the
called number.
3 Press the PTT switch to make the call or the Side 2 key to
page the selected recipient.
Note: Switching OFF the transceiver power clears the redial
memory.
34
DTMF N
TORED
" appears on the display after confirming the
key to delete the entry from the
M O
ODELS NLY
key followed by the 0 key to display the last
UMBERS
)