Field Settings - Daikin BRC1D517 Installation Manual

Daikin remote controller installation manual
Hide thumbs Also See for BRC1D517:
Table of Contents

Advertisement

5. Permission level function
If required, you can limit the user action by
restricting the number of operable buttons. Refer
to the chapter
"Field
Level
1
All
2
• on/off button
• schedule timer button
• temperature adjust button
• operation change/
• fan speed button
• air flow direction adjust button
3
• on/off button
• temperature adjust button
• fan speed button
For switching between level 1 permission and the
selected level in service, proceed as follows:
1
Keep the fan speed button
2
and press the 3 other indicated keys
simultaneously while keeping the fan speed
button
pressed.
Refer to
figure
8.
If you want to limit the user action on the remote
controller to be defined as "sub", start with only
connecting this controller to the unit. Make sure
that this controller is set to "main" (factory set)
first, change the permission level to the setting
you prefer and only then set the remote controller
to "sub".
You can now proceed with connecting the remote
controller to be defined as "main".
BRC1D517
Remote controller
4PW15195-1
settings".
Operable buttons
button
pressed,

6. Field settings

If optional accessories are mounted on the indoor
unit, the indoor unit setting may have to be changed.
Refer to the instruction manual for each optional
accessory.
Refer to
figure
7.
a
Unit NO
b
First Code NO
c
Second Code NO
d
Mode NO
e
Field set mode
Procedure
(Refer to figure 7)
1
When in the normal mode, press the "
button for a minimum of four seconds, and the
FIELD SET MODE is entered.
2
Select the desired MODE NO. with the "
button.
3
During group control, when setting by each
indoor unit (mode No. 20, 21, 22 and 23 have
been selected), push the "
select the INDOOR UNIT NO. to be set. (This
operation is unnecessary when setting by
group.)
4
Push the "
" upper button and select
FIRST CODE NO.
5
Push the "
" lower button and select the
SECOND CODE NO.
6
Push the "
" button once and the present
settings are SET.
7
Push the "
" button to return to the NORMAL
MODE.
"
"
" button and
Installation manual
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents