Installation - Daikin BRC1D517 Installation Manual

BRC1D517
READ THIS
BEFORE STARTING UP THE UNIT. DO
NOT THROW IT AWAY. KEEP IT IN YOUR
FILES FOR FUTURE REFERENCE.
IMPROPER
ATTACHMENT
ACCESSORIES
ELECTRIC SHOCK,
LEAKS, FIRE OR OTHER DAMAGE TO
THE EQUIPMENT. BE SURE ONLY TO
USE ACCESSORIES MADE BY DAIKIN
WHICH ARE SPECIFICALLY DESIGNED
FOR THE USE WITH THE EQUIPMENT
AND HAVE THEM INSTALLED BY A
PROFESSIONAL.
IF UNSURE OF INSTALLATION PROCE-
DURES OR USE, ALWAYS CONTACT
YOUR DEALER
INFORMATION.
The kit includes the following parts:
Remote controller
BRC1D517
Remote controller
4PW15195-1
Remote controller
MANUAL ATTENTIVELY

INSTALLATION

OF EQUIPMENT
COULD RESULT
SHORT-CIRCUIT,
FOR ADVICE AND
Wood screws
Wall plugs
OR
OR
IN
1. Remove the upper part of remote
controller
Insert a minus screwdriver into the slots (1) in the
lower part of the remote controller (2 places), and
remove the upper part of the remote controller.
The PC board is mounted in the upper part
of the remote controller. Be careful not to
damage
screwdriver.
2. Fasten the remote controller
to figure 2)
1 for exposed mounting, fasten with the two
included wood screws (Ø4x30) and plugs.
2 for flush-mounting, fasten with the two
included machine screws (M4x16).
For the field supplied switch box, use optional accessory
KJB111A or KJB211A.
NOTE Choose the flattest place possible for the
mounting surface. Be careful not to
distort the shape of the lower part of the
remote controller by overtightening the
mounting screws.
Installation manual
Machine screws
(Refer to figure 1)
the board with the
Installation manual
minus
(Refer
1