Table of Contents
Advertisement
1.3 Quick Setup
This section provides the essential information for experienced users to operate the switch
immediately. For detailed installation instruction, please see chapter 2 for more
information.
Important Information
The default IP address: 192.168.2.1
The default username is: admin
The default password is: airlive
By the default, the PoE port's power is turned off. You
must turn on the power through web management.
This switch does not work with 802.3af and 802.3at PoE
devices.
Please make sure your device's PoE port can accept 24V
passive PoE power. 12V passive PoE kit will not work
with this switch.
The switch does not include the optional rack mount kit, it
must be purchased separately
It is recommended that you install the switch with an UPS
to protect from potential power surge.
By default, the POE function of each port is
disabled. You must enable it by going to the web
management.
Please do not enable the PoE function on the ports that
are not connected to the passive PoE devices. Enabling
PoE power on a port that is connected with PC or switch
can cause damage or fire hazard.
3
AirLive POE-FSH8PW User's Manual
1. Introduction
Advertisement
Table of Contents
