Connecting To Power; Reset To Default - Ovislink Air Live POE-FSH8PW User Manual

Auto MDI/MDI-X function
The POE-FSH8PW PoE Switch is equipped with Auto-MDI/MDI-X function, which allows
you to use straight-thru cable even when connecting to another switch/hub. Simply use
the straight-through cable for all types of 10/100BASE-TX connections, either to a PC or to
a networking device such as other hub or switch.
Specification
Interface
Cable to Use
To an end station
To a hub/switch
Maximum Distance

2.7 Connecting to Power

POE-FSH8PW PoE Switch features a universal auto-select power supply unit, which allows
a power connection to a wide range of input voltages from 100 to 240VAC @ 50 ~ 60Hz.
To establish its power connection, simply plug the female end of the power cord into the
power connector on the rear of the switch and the male end of the power cord into a
suitable power outlet. Once you have correctly plugged in the power, you can then turn on
the Power Switch to activate the switch.

2.8 Reset to Default

When you forgot your IP or password, please use the reset button for the factory default
setting? Please take the following steps to reset the Web Smart Switch back to the original
default:
AirLive POE-FSH8PW User's Manual
Connection
Straight-through twisted-pair cable
Straight-through twisted-pair cable
10 /100Base-TX
RJ-45
100 meters
12
2. Installation of the Switch