Charcoal Filter - Miele DA 6796 W Operating And Installation Instructions

 Replace the grease filter, making sure
that the locking clip is facing
outwards.
 If the grease filter is inadvertently
replaced the wrong way round, insert
a small screwdriver blade into the slit
to disengage the clip.
 Close the canopy and press it on the
right and left into the catch.
Resetting the grease filter operating
hours counter
After cleaning, the operating hours
counter needs to be re-set.
 Whilst the fan is switched on, press
the Grease filter control  for
approx. 3 seconds, until only the 1 is
flashing.
The Grease filter symbol  goes out.
If you want to clean the grease filters
before the operating hours counter has
reached its maximum,
 Touch the Grease filter control  for
approx. 6 seconds, until only the 1 is
flashing.
Cleaning and care

Charcoal filter

Recirculation cooker hoods must be
fitted with a charcoal filter in addition to
the grease filter. This is designed to
absorb cooking odours.
It is fitted in the top of the cooker hood.
Replacement charcoal filters can be
obtained from Miele, your Miele dealer
or via the internet at www.miele-
shop.com. See "Technical data" for
type and reference number.
Fitting/replacing a charcoal filter
 Take the charcoal filter out of its
packaging.
 Fit the charcoal filter into the holder in
the top of the cooker hood.
 When fitting for the first time, activate
the operating hours counter (see
"Operation").
29