Kenwood KRF-V5010 Instruction Manual page 21

Kenwood audio video surround receiver instruction manual
Hide thumbs Also See for KRF-V5010:
Table of Contents

Advertisement

1
Complete steps 1~3 of "Presetting RDS stations (RDS
AUTO MEMORY)".
Skip this step if you have already completed the RDS AUTO
MEMORY procedure.
• The EON function will not work if all 30 FM preset stations were
stored manually using the procedure shown in "Presetting radio
stations manually". Be sure to use the RDS automatic memory
function.
2
Press the TA/NEWS key to select the information type
of your choice.
Display When "TA" is selected
B BC 1 FM
SP
A
B
TI.VOL
MUTE
RDS
EON PTY
TP TA
NEWS
"TP" lights for stations where TP (Traffic Program) information
can be received.
Each press switches the reservation mode as follows:
1 TA
(Traffic Announcement)
2 NEWS
(News)
3 TA, NEWS (Traffic Announcement and News)
4 off
(EON off)
• If "TA" and "NEWS" can not be selected, carry out the RDS
automatic memory function again.
3
Tune to a preset RDS station.
Choose an RDS preset station that displays both the "RDS" and
"EON" indicators.
Display When "TA" is selected
B BC 2 FM
B
SP
A
TI.VOL
MUTE
RDS EON
PTY
TP
TA
NEWS
Be sure "EON" appears in the display
• If you want to reserve TA, receive a station with which the TP
indicator lights.
• When "EON" does not light although an RDS station is received,
that station is not transmitting EON data. Please select a different
station.
4
Wait for the information you selected while listening to
the current station.
The receiver will wait for the desired information to start as long as
the tuner is set to a preset RDS station that displays both the "EON"
and "RDS" indicators, and the power is turned ON.
When listening to the tuner:
Be sure to stay tuned to stations that display both the "EON" and
"RDS" indicators.
To listen sources other than the tuner:
1 Tune in a station which that displays both the "EON" and "RDS"
indicators, then use the INPUT SELECTOR to switch the input to
the source you desire.
2 Even when the INPUT SELECTOR is set to a source other than
tuner, it will automatically switch to tuner when the desired EON
program starts to broadcast. During this period, the source
selected in step 1 continues playing, but will not be heard.
3 When reception of the desired EON program is complete, the
INPUT SELECTOR returns to the previous input source.
• When the power is OFF, the EON function does not operate.
• If a reserved EON program starts to broadcast during analog
recording, the INPUT SELECTOR switches to the tuner and the
station broadcasting the EON program is recorded.
When waiting for information while listening to a RDS
*
station without the EON function
If the "EON" indicator does not light in steps 3 and 4 and the desired
kind of information has already been selected, the information from
only the station being received will be waited for.
TP (Traffic Program) indication
When the "TP" indicator is lit, this means that the presently-received
station or a station in the same network is transmitting traffic informa-
tion. When "TP" is displayed for the station being received, the traffic
information of this station can be received without EON reservation.
FM
AUTO SOUND DIGITAL
AUTO
AM
PRO LOGIC
S.DIRECT
MEMO.
MHz
STEREO
MONITOR
ST.
kHz
DOWNMIX
DSP
TUNED
To cancel EON reservation
Turn the "TA" and "NEWS" indicators off.
Setting the volume while receiving information (TI volume)
If you preset the volume level, you can listen to the information of your
choice at that volume level automatically. After the information has
*
been received, the volume returns to the previous level.
1 Hold down the TA/NEWS key for more than two seconds so that
the "TI.VOL" indicator starts blinking.
FM
AUTO SOUND DIGITAL
AUTO
PRO LOGIC
AM
S.DIRECT
MEMO.
STEREO
MHz
MONITOR
ST.
DOWNMIX
kHz
DSP
TUNED
2 Use the VOLUME CONTROL knob to select the desired volume
level.
Proceed to next step within five seconds.
3 Press the TA/NEWS key to enter the new setting.
• The "TI.VOL" indicator stops blinking and remains lit.
Canceling TI volume
Hold down the TA/NEWS key for more than two seconds so that
the "TI.VOL" indicator goes off.
Listening to radio broadcasts
T I -5 dB
SP
A
B
TI.VOL
MUTE
RDS
EON PTY
TP TA NEWS
KRF-V7010/V6010/V5010 (En/T)
21
)
FM
AUTO SOUND DIGITAL
AUTO
AM
PRO LOGIC
S.DIRECT
MEMO.
MHz
STEREO
MONITOR
ST.
kHz
DOWNMIX
DSP
TUNED
Blinks

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Krf-v6010Krf-v7010

Table of Contents