Hands Free Unit Control; Control Screen Function - Kenwood KOS-V1000 Instruction Manual

Hands Free Unit Control

• You need to register your cell-phone to your Bluetooth Hands Free Box beforehand. Make sure to read the instruction manual
of the Bluetooth Hands Free Box as well.

Control Screen Function

Displaying the control screen and using various
functions.
1 Display the control screen
Press several times until the Control Screen
appears.
2 Display the source select screen
1
1 Displays the status of connection with the
cell-phone.
White: The cell-phone is connected.
Orange: The cell-phone is not connected,
or it is outside the service range.
3 Display the Hands-Free Control screen
50 KOS-V1000
NAVI
MODE/TOP MENU FNC/MENU/PBC AUDIO RETURN
ROUTEM VOICE CANCEL
AV OUT OPEN SUBTITLE
VIEW MAP DIR
ANGLE
FM +
16
2
3
4
5
14
8
2 Displays the Search for Phone Book screen.
(See <Calling by Phone Book>, page 52)
3 Displays the Out Going Calls screen.
(See <Redialing>, page 54)
4 Displays the Incoming Calls screen.
(See <Redialing>, page 54)
5 Switches between the private and hands-
free modes (only when a call in progress).
6 Displays the Hands-Free Set Up screen.
(See <Setting up the Hands-Free Phone>,
page 55)
7 Enter three phone numbers for quick
dialing.
(See <Quick Dialing>, page 52)
8 Enters a phone number.
(See <When Dialing>, page 51)
9 Displays the signal strength.*
The more the number of bar segments, the
stronger the signal.
p Displays the present Auto Answering status
When Auto Answering is on:
When Auto Answering is off:
q Displays the battery drain of the cell-
phone.*
The more the number of bar segments, the
higher the battery level.
w Starts the call.
e Ends the call.
Clears the phone number being entered.
r Clears the entered phone number.
t Returns to the previous screen.
y Displays the calling and called phone
numbers.
If you have registered a phone number in
the Phone Book, the destination person
name is displayed.
9 10 11
12
13
7
6
15
AUTO