S-Video In/Out/Monitor Out Connection - Panasonic CT-1388YD Operating Instructions Manual

S-Video In & Out Connection
CT-1388YD, CT-1389VYD, CT-2088YD and CT-2089VYD
The S-Video IN and OUT terminals located on the back of Monitor directly pass the input signals
through the out terminals, so you may monitor or record the external video/audio information.
Notes:
• Only Video 3 audio in and out may be used with S-Video operation.
• Connection of optional S-Video jack will override the standard Video Input 3 BNC connector.
• S-Video IN and OUT terminals will operate whether the Monitor is ON or OFF.
Operation
1. Connect S -VIDEO input to a external audio/video source as shown.
2. Connect video 3 audio in jack as shown.
3. Press the TV/VIDEO or VIDEO SELECT button to select video 3 mode.
4. Connect S -VIDEO out to a monitor or VCR as shown.
5. Connect video 3 audio out jack as shown.
6. The output terminals will provide the same signals as the input terminals for monitoring or
recording.
External Audio/Video Equipment
IN
AUTO 75
S-VIDEO
IN
OUT
VCR
OR
Monitor Out Connection
The Monitor out terminals will output video and audio signals being displayed onsrceen.
Connect the Monitor out terminals as shown above for models CT-1388VD, CT-1389VYD,
CT-2088VD, and CT-2089VYD. Connect the Monitor Out terminals as shown below for models
CT-2788YD and CT-2789VYD.
Note: The Monitor Out terminals only operate when the monitor is on.
S-VIDEO
OUT
OR
Monitor VCR
VIDEO 3 VIDEO 2
AUDIO AUDIO
Ω Ω
/HIGH AUTO 75 /HIGH
OUT IN OUT
VIDEO VIDEO
Monitor
MONITOR OUT
IN
AUDIO
R L R
VIDEO
Ω
AUTO 75 /HIGH
- 5 -
VIDEO 1 MONITOR OUT
AUDIO
AUDIO
Ω
AUTO 75 /HIGH
IN OUT
VIDEO
VIDEO
Monitor
OUTPUT INPUT
AUDIO AUDIO
L R
VIDEO VIDEO
Ω Ω
AUTO 75 /HIGH AUTO 75 /HIGH
L