No Sound - Sanyo PLC-XU350A Service Manual
Multimedia projector
Hide thumbs
Also See for PLC-XU350A:
- Owner's manual (168 pages) ,
- Specification sheet (2 pages) ,
- Brochure & specs (2 pages)
Table of Contents
Advertisement
Troubleshooting
No Sound
Check following steps.
check if the audio signal
is observed at pins 7 and
15 of Ic5001.
Yes
check if the audio signal
is observed at pins 5 and
8 of Ic5031.
Yes
Check audio output circuit.
Check speaker, connection of the terminal "K8F" .
No
Check IC5001 and peripheral circuit.
Check 1V power supply.
No
Check IC5031, IC5081 and peripheral circuit.
Check the Mute signal at pin 5 of Q5035. The Mute signal is output from
pin 344 of IC 301<Scaler>. The OUT_DET signal is sent from Audio Out
terminal.
Mute-On: H at pin 344 of IC301, L at pin 1 of IC5031.
-6-
Advertisement
Table of Contents
