Locations And Directions - Sanyo PLC-XU350A Service Manual

Optical Parts Disassembly

8. locations and directions

When mounting or assembling the optical parts in the op-
tical unit, the parts must be mounted in the specified loca-
tion and direction as shown in figure below.
1

3
4
Point marker is
printed on this side
up.
5
P o i n t m a r k e r i s
printed on this side
up.
6
7
9
8
P o i n t m a r k e r i s
printed on this side
No. Parts Name
1 Integrator lens (IN)
 Integrator lens (OUT)
3 Prism beam splitter (PBS)
4 Condenser lens (OUT)
5 Dichroic mirror (B)
6 Dichroic mirror (G)
7 Condenser lens (G)
8 Mirror (R)
9 Relay lens (IN)
10 Condenser lens (R)
11 Condenser lens (B)
1 Mirror (B)
The rugged sur-
face is facing this
side.
Rugged surface is
facing this side.
Film attached side
is facing this side.
P o i n t m a r k e r i s
printed on this side
P o i n t m a r k e r i s
printed on this side
-3-
1
11
10
8
Fig.8