Mechanical Disassembly; Cabinet Top, Front, R/C Board Removal - Sanyo PLC-XU350A Service Manual

Mechanical Disassembly

Mechanical disassembly should be made following procedures in numerical or-
der.
Following steps show the basic procedures, therefore unnecessary step may
be ignored.
Caution:
The parts and screws should be placed exactly the same position as the original
otherwise it may cause loss of performance and product safety.

1. cabinet top, Front, r/c Board removal

1. Loose screw A (M3x8 ) to remove the Lamp Cover.
. Remove 5 screws B (M3x8 ) to remove the Cabinet Top.
3. Remove the Control Buttons and Dec Inlay LED.
4. Remove 3 screws C (M3x6) and screws D (T3x8 ) to re-
move the Cabinet Front.
5. Remove screw E (T3x6 ) to remove the R/C Board.
6. Remove  screws F (T3x6) ti remove the Dec Lens.
C
D
Cabinet top
B
Control Buttons
Dec Inlay LED
R/C Board
E (T3X6)
F
F (T3X6)x
C
Dec Lens
C (M3X6)x3
D
D (T3X8)x3
Lamp Cover
B
A (M3x8)
B (M3x8)x5
Cabinet Front
-13-
Screws Expression
(Type ) mm
Diameter x Length
T type M Type
B
B
Fig.1