Set The Time, Date & Units; Backlight Settings - ACU-RITE 1506 Instruction Manual

Set the Time, Date & Units
Press the "SET" button, located on the front of the display unit, to enter SET
MODE. Once in set mode, the preference you are currently setting will blink on
the display.
To adjust the currently selected (flashing) item, press and release the "
" " buttons (press and HOLD to fast adjust).
V
To save your adjustments, press and release the "SET" button again to adjust
the next preference. The preference set order is as follows:
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
TEMPERATURE UNITS (ºF or ºC)
WIND UNITS (MPH, KPH, or Knots)
RAIN UNITS (inches or mm)
PRESSURE UNITS (inHg or hPa)
You will automatically exit SET MODE if no buttons are pressed for 20 seconds.
Enter setup mode at any time by pressing the "SET" button.
Display Backlight Settings
This weather station's display features three different lighting settings: High
(100%) brightness, Medium (60%) brightness and Low (30%) brightness
Using battery power alone, the backlight is available momentarily for 10
seconds by pressing the "
When display is powered with the power adapter, backlight remains on at
100% brightness. Press "
again to dim to 30%, press a 3rd time to enter "AUTO DIM" mode. "AUTO
DIM" appears below time.
AUTO DIM MODE:
MARCH 11- NOVEMBER 4
NOVEMBER 5 - MARCH 10
" button.
" button once to dim to 60% brightness; press
Automatically adjusts display brightness based on time of day & year.
6:00 a.m. - 9:00 p.m. = 100% brightness
9:01 p.m. - 5:59 a.m.= 30% brightness
7:30 a.m. - 7:00 p.m.= 100% brightness
7:01 p.m. - 7:29 a.m. = 30% brightness
9
" or
T