Names And Functions Of Parts - Kenwood G-EQ300 Instruction Manual

Names and functions of parts

40 63
1 2 3
PATTERN
PAUSE
ON/STANDBY
MAIN POWER
-ON –OFF
EQ.EFFECT
TAPE
! @ # $ % ^
1
MAIN POWER key
Switch the unit ON mode.
2
ON/STANDBY key
Switch the unit between ON mode
and STANDBY mode.
3
Standby indicator
Lights up to indicate that a small
amount of current flows in the unit.
4
PATTERN key
Press to enter or quit the genre mode.
5
TAPE indicator
Lights up when the TAPE key is
pressed to ON.
6
PAUSE key
Press to let an equalizer curve pause
temporarily.
7
WIDE/NARROW key
Each press of the key switches the
curve slope alternately between WIDE
and NARROW.
8
GRAPHIC/PARAMETRIC key
GRAPHIC: Select this mode when
adjusting an equalizer curve.
PARAMETRIC: Select this mode
when creating an equalizer curve ac-
cording to center frequencies.
STANDBY indicator
While standby mode is indicated, a small amount of power is supplied to the system to back up the memory. In this mode, the
system can be turned ON by remote control.
Graphic equalizer display
Spectrum analyzer display
Character display
98 160 250 400 625 1k 1.5k
4 5 6
TAPE
DISPLAY REVERSE FLAT MANU./REF.
1 4
2 3
&
90 EQ. LEVEL
/
Press the
key to increase or decrease the equal-
izer level.
!
EQ. EFFECT key
Press to turn the equalizer mode ON
and OFF.
@
TAPE key
Use when playing back or recording a
tape.
#
DISPLAY key
Press to switch the display mode or to
select the demonstration mode.
$
REVERSE key
Press to reverse an equalizer curve.
%
FLAT key
Press to make an equalizer curve flat.
^
MANU./REF. key
Press to switch the manual and refer-
ence functions alternately.
&
Preset keys (1 to 5)
Typical equalizer patterns have been
preset under these keys so that you
can select any one of them easily.
Character display
Frequency display
indicator
* * * * * *
EQ. ON
MEMORY
MANUAL
REFERENCE
2.5k 3.9k 6.3k 10k 16 k
Display
BYPASS CAR H.P.ST.
POP./1 FUSION/4 CLASSIC/5 MOVIE
5 MEMORY ROCK/2 JAZZ/3
* (
(UP)
(DOWN) keys
(UP) or (DOWN)
Indicators
GRAPHIC EQ. ON GRAPHIC
PARAMETRIC
MEMORY PARAMETRIC
F1 F2 F3
WIDE NARROW
MANUAL F1, F2, F3
REFERENCE WIDE/NARROW
7 8
GRAPHIC/
PARAMETRIC
WIDE/NARROW
FREQUENCY JOG
F1 F2
F3
) ¡
*
MEMORY key
Press this key when registering a user-
created equalizer pattern.
(
Genre keys
Press in the genre mode to select the
desired music genres and their equal-
izer patterns.
)
Frequency keys (F1, F2, F3)
Each key can store a desired center
frequency.
¡
FREQUENCY JOG knob
Rotate the control knob to adjust the
frequency band (range).
G-EQ300 (En/K)
7
9 0
EQ.LEVEL