Use Of Equalizer Effect With Tape; Applying Equalizer Effect To Tape Playback - Kenwood G-EQ300 Instruction Manual

Use of equalizer effect with tape

Preparation
Make preparation for playback.
For the preparation for playback, refer to the
instruction manuals of the cassette tape deck.

Applying equalizer effect to tape playback

1
Set the TAPE switch to ON.
2
Select the "EQ.ON" mode.
3
Create a desired equalizer pattern.
See pages @ to )
4
Play a tape.
To stop tape playback
Press the stop key of the cassette tape deck.
When playing a tape which has been recorded together with the equalizer effect, set the EQ.EFFECT key to OFF.
Note Note
TAPE
EQ.EFFECT
: Keys and control used in the operations described on this page.
Lights up.
TAPE
"EQ, ON" Lights up.
EQ. ON
40 63 98 160 250 400 625 1k
G-EQ300 (En/K)
1.5k 2.5k 3.9k 6.3k 10k 16 k
2 1